Georges Tsoucaris, and Janusz Lipkowski, eds. Molecular and Structural Archaeology: cosmetic and therapeutic chemicals. Springer Science & Business Media, 117, (2003); https://doi.org/10.1007/978-94-010-0193-9.

Meeks, Nigel. Surface characterization of tinned bronze, high-tin bronze, tinned iron and arsenical bronze. Metal plating and patination. Butterworth-Heinemann, 247 (1993); https://doi.org/10.1016/B978-0-7506-1611-9.50025-X

Ahmad Abu-Baker, Analytical investigation and electrochemical conservation treatment for archaeological copper alloy artifacts from Jordan. Conservar Património? 42, 38 (2023); https://doi.org/10.14568/cp26263.

Karim, A. S., Majeed, Z. N., & Darweesh, S. Y. (2021, August). The effect of nanostructured zirconia reinforcement on the mechanical and structural properties of a copper-based system. In Materials Science Forum (Vol. 1039, pp. 297-306). Trans Tech Publications Ltd.‏ https://doi.org/10.4028/www.scientific.net/MSF.1039.297.

Hussein, Orass A., Omar F. Abdullah, and Sara S. Tawfeek. Determination of physical and thermal properties of Triiodosilane by semi-empirical approach. Iraqi Journal of Applied Physics, 20(2B), 449 (2024); https://doi.org/10.2025/ae14kr35.

Smallman, Raymond E., and A. H. W. Ngan. Physical metallurgy and advanced materials. Elsevier, 2011.‏

M. Mereu, V. Basilissi, G. Guida, M. Vidale, M.P. Casaletto, G.M. Ingo, ... & E. Greco, Conservation of copper alloys artefacts from archaeological excavation. YOCOCU: Contribute and Role of Youth in Conservation of Cultural Heritage, 163 (2011); https://doi.org/10.13140/2.1.2424.3525.

Ahmed, M. N., Daham, N. A., & Darweesh, S. Y. (2024, February). Structural and mechanical properties for (Ni-WC) system by using thermal spray. In AIP Conference Proceedings (Vol. 2885, No. 1, p. 020013). AIP Publishing LLC.‏ https://doi.org/10.1063/5.0181722.

T. Giraud, A. Gomez, S. Lemoine, C. Pelé-Meziani, A. Raimon, & E. Guilminot, Use of gels for the cleaning of archaeological metals. Case study of silver-plated copper alloy coins. Journal of Cultural Heritage 52, 73 (2021); https://doi.org/10.1016/j.culher.2021.08.014.

Al-Qaseer, Ahmed Laftah Rahma. The technique of manufacturing metal alloys as a model for the development of chemistry in the civilization of Mesopotamia in the light of Cuneiform texts and archaeological evidence. Iraqi Journal of Humanitarian, Social and Scientific Research, 3 (9S), 100 (2023).‏

Bolton, William. Engineering materials technology. Elsevier, 2013.‏

Raghavan, Viswanatha. Materials Science and Engineering: A first course. PHI Learning Pvt. Ltd., 2015.‏

Hofmann, Philip. Solid state physics: an introduction. John Wiley & Sons, 2022.‏

A.V. Feitosa, et al. A new route for preparing CdS thin films by chemical bath deposition using EDTA as ligand. Brazilian Journal of Physics, 34, 656 (2004); https://doi.org/10.1590/S0103-97332004000400034.

William Bolton. Engineering materials technology. Elsevier, 2013.‏

I.K. Jassim, K.H. Erzaich, M.A. Majeed, & O.F. Abdullah, The effect of heat treatment on the structural properties of the (Alnico-5) alloy prepared by powder metallurgy method. Advances in Applied Science Research, 36‏ (2015).

R. S.Antar, S. Y.Darweesh, & F. W.Ridha, Production of a double cermet coating to treatment of the turbine blades. Engineering Research Express, 6(1), 015407 (2024);‏ https://doi.org/10.1088/2631-8695/ad2f82.

‏Huba, Zachary John. Synthesis and characterization of cobalt carbide based nanomaterials. Virginia Commonwealth University, 2014.‏

S. Baek, S. Choi, J.O. Kim, Y.J. Kim, & C. Park, Effect of laser surface cleaning on yellow brass: Application for cartridge case maintenance. Optics & Laser Technology, 174, 110638. (2024); https://doi.org/10.1016/j.optlastec.2024.110638.

Salih, W. A., Allah, S. M. A., & Darweesh, S. Y.. Effect of spray angle on some physical properties of a ceramic system produced by thermal spraying coating. Al-Bahir Journal for Engineering and Pure Sciences, 2(2), 4 (2023);‏ https://doi.org/10.55810/2313-0083.1022.