Weinick RM, Burns RM, Mehrotra A. How many emergency department visits could be managed at urgent care centers and retail clinics? Health Aff Millwood. 2010;29(9):1630–6.
Article PubMed PubMed Central Google Scholar
Farrell C, Hannon M, Monuteaux MC, Mannix R, Lee LK. Pediatric fracture epidemiology and US emergency department resource utilization. Pediatr Emerg Care. 2022;38(7):e1342.
Beagles CB, Watkins IT, Lechtig A, Blazar P, Chen NC, Lans J. Trends in inpatient versus outpatient upper extremity fracture surgery from 2008 to 2021 and their implications for equitable access: a retrospective cohort study. Eur J Orthop Surg Traumatol. 2024;34(8):4049–56.
Becker DJ, Yun H, Kilgore ML, Curtis JR, Delzell E, Gary LC, et al. Health services utilization after fractures: evidence from Medicare. J Gerontol A Biol Sci Med Sci. 2010;65(9):1012–20.
Bonafede M, Espindle D, Bower AG. The direct and indirect costs of long bone fractures in a working age US population. J Med Econ. 2013;16(1):169–78.
Taljanovic MS, Jones MD, Ruth JT, Benjamin JB, Sheppard JE, Hunter TB. Fracture fixation. Radiogr. 2003;23(6):1569–90.
Skou ST, Juhl CB, Hare KB, Lohmander LS, Roos EM. Surgical or non-surgical treatment of traumatic skeletal fractures in adults: systematic review and meta-analysis of benefits and harms. Syst Rev. 2020;9:179. https://doi.org/10.1186/s13643-020-01424-4.
Article PubMed PubMed Central Google Scholar
Ekanayake C, Gamage JCPH, Mendis P, Weerasinghe P. Revolution in orthopedic immobilization materials: A comprehensive review. Heliyon. 2023;9(3):e13640.
Article PubMed PubMed Central Google Scholar
Scheinberg M, Nihalani S, Mehta L, Shah A. Evolution in casting techniques: a narrative review of casting methods, techniques, and innovation. Cureus. 2024;16(2):e53454.
PubMed PubMed Central Google Scholar
Chen Y, Lin H, Yu Q, Zhang X, Wang D, Shi L, et al. Application of 3D-printed orthopedic cast for the treatment of forearm fractures: finite element analysis and comparative clinical assessment. BioMed Res Int. 2020;2020:9569530. https://doi.org/10.1155/2020/9569530.
Article PubMed PubMed Central Google Scholar
Schlégl ÁT, Told R, Kardos K, Szőke A, Ujfalusi Z, Maróti P. Evaluation and comparison of traditional plaster and fiberglass casts with 3D-printed PLA and PLA-CaCO3 composite splints for bone-fracture management. Polymers. 2022;14(17):3571.
Article PubMed PubMed Central Google Scholar
Van Lieshout EMM, Verhofstad MHJ, Beens LM, Van Bekkum JJJ, Willemsen F, Janzing HMJ, et al. Personalized 3D-printed forearm braces as an alternative for a traditional plaster cast or splint; A systematic review. Injury. 2022;53(Suppl 3):S47-52.
Lu P, Liao Z, Zeng Q, Chen H, Huang W, Liu Z, et al. Customized three-dimensional-printed orthopedic close contact casts for the treatment of stable ankle fractures: finite element analysis and a pilot study. ACS Omega. 2021;6(4):3418–26.
Article CAS PubMed PubMed Central Google Scholar
Guebeli A, Thieringer F, Honigmann P, Keller M. In-house 3D-printed custom splints for non-operative treatment of distal radial fractures: a randomized controlled trial. J Hand Surg (European Volume). 2024;49(3):350–8.
El Khoury G, Libouton X, De Boeck F, Barbier O. Use of a 3D-printed splint for the treatment of distal radius fractures: a randomized controlled trial. Orthop Traumatol Surg Res. 2022;108(5):103326. https://doi.org/10.1016/j.otsr.2022.103326.
Schwartz DA, Schofield KA. Utilization of 3D printed orthoses for musculoskeletal conditions of the upper extremity: a systematic review. J Hand Ther. 2023;36(1):166–78.
Alrasheedi NH, Tlija M, Elloumi N, Louhichi B. A critical review of 3D printed orthoses towards workflow implementation in the clinical practice. J Eng Res [Internet]. 2024 Feb 9 [cited 2025 Mar 9]; Available from: https://www.sciencedirect.com/science/article/pii/S2307187724000257.
Factor S, Atlan F, Pritsch T, Rumack N, Golden E, Dadia S. In-hospital production of 3D-printed casts for non-displaced wrist and hand fractures. SICOT-J. 2022;8:20. https://doi.org/10.1051/sicotj/2022021.
Article PubMed PubMed Central Google Scholar
Lin H, Shi L, Wang D. A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast. 3D Print Med. 2015;2(1):4. https://doi.org/10.1186/s41205-016-0007-7.
Ma H, Ruan B, Li J, Zhang J, Wu C, Tian H, et al. Topology-optimized splints vs casts for distal radius fractures: a randomized clinical trial. JAMA Netw Open. 2024;7(2):e2354359.
Article PubMed PubMed Central Google Scholar
Kokars K, Krauze A, Muiznieks K, Virbulis J, Verners P, Gutcaits A, et al. Density-based topological optimization of 3D-printed casts for fracture treatment with Freefem software. Latvian J Phys Tech Sci. 2023;60(s6):124–41.
Verschoor H, Toxopeus M, Altnji S, van Ginkel L, Stirler V, Tuijthof G. LCA comparing 3D printed splints to conventional splints for traumatic injuries. Procedia CIRP. 2024;122(1):1000–5.
Hobayan CGP, Bates NA, Heyniger J, Alzouhayli K, Piscitani F, Haider CR, et al. Stability of one-step spray-on splint for lower extremity fractures during splinting, MEDEVAC, and impact. Mil Med. 2024;189(9–10):1947–54.
Webb T, Lynch D, Lin J, Groth A, Ly T, Martin KD. Lower extremity splinting: a head-to-head comparison of a novel one-step spray-on splint versus standard splinting. Mil Med. 2023. https://doi.org/10.1093/milmed/usab505.
Roebke AJ, Bates N, Jurenovich K, Yu E, Karnes J, Khan S, et al. Cervical spinal immobilization: a head-to-head comparison of a one-step spray-on foam splint versus structural aluminum malleable splint immobilization. Mil Med. 2023;188(9–10):e2987-2991.
Martin KD, Unangst A, Chisholm J. Fracture immobilization in an austere environment: a comparative study of military special operations medical personnel using a SAM splint vs a one-step spray on foam. Foot Ankle Orthop. 2019;4(4):2473011419S00297.
Article PubMed Central Google Scholar
Cast21 [Internet]. [cited 2025 Mar 9]. The waterproof cast alternative for the 21st century. Available from: https://www.cast21.com.
Stefanescu K, Seshadri A, Hogg-Cornejo V. Cast21: the revolutionary technology for treating broken bones [Internet]. 2023 [cited 2025 Mar 9]. Available from: https://www.cast21.com/blog/new-cast-technology-for-broken-bones#displacement-and-deformation-measurements.
Plastics Engineering [Internet]. 2024 [cited 2025 Mar 9]. Cast21’s innovative resin casts for improved healing. Available from: https://www.plasticsengineering.org/2024/01/cast21s-innovative-resin-casts-for-improved-healing-003258/.
Mehlhase S. Fraunhofer Institute for Applied Polymer Research IAP. 2019 [cited 2025 Mar 9]. New splint for bone fractures. Available from: https://www.iap.fraunhofer.de/en/press_releases/2019/new-splint-for-bone-fractures.html.
Medical Device and Diagnostic Industry [Internet]. 2019 [cited 2025 Mar 9]. Compostable splint can be reshaped multiple times as patient heals. Available from: https://www.mddionline.com/materials/compostable-splint-can-be-reshaped-multiple-times-as-patient-heals.
Enovis [Internet]. [cited 2025 Mar 9]. Exos. Available from: https://enovis.com/our-brands/exos.
Koay I. Use of EXOS® thermoplastic splint in the treatment of wrist fractures: a retrospective cohort study of use – the Silverdale medical experience. J Trauma Treat [Internet]. 2019 Feb 14 [cited 2025 Mar 9].
Santoni BG, Aira JR, Diaz MA, Kyle Stoops T, Simon P. Radiographic evaluation of acute distal radius fracture stability: a comparative cadaveric study between a thermo-formable bracing system and traditional fiberglass casting. Clin Biomech. 2017;1(47):20–6.
White DE, van Wyk JM. Comparison of water absorption and drying in distal radius fracture casts and orthoses. J Am Acad Orthop Surg Glob Res Rev. 2021;5(9):e21.00115.
PubMed PubMed Central Google Scholar
OrthoHeal [Internet]. [cited 2025 Mar 9]. FlexiOH: light cured polymer immobilizer. Available from: https://orthoheal.com/.
Viswanathan VK, Jain VK, Sangani C, Botchu R, Iyengar KP, Vaishya R. SMART (self- monitoring analysis and reporting technology) and sensor based technology applications in trauma and orthopaedic surgery. J Orthop. 2023;44:113–8.
Article PubMed PubMed Central Google Scholar
Ledet EH, Liddle B, Kradinova K, Harper S. Smart implants in orthopedic surgery, improving patient outcomes: a review. Innov Entrep Health. 2018;5:41–51.
Article PubMed PubMed Central Google Scholar
Iyengar KP, Kariya AD, Botchu R, Jain VK, Vaishya R. Significant capabilities of SMART sensor technology and their applications for Industry 4.0 in trauma and orthopaedics. Sens Int. 2022;3:100163.
Tuan CC, Lu CH, Wu YC, Yeh WL, Chen MC, Lee TF, et al. Development of a system for real-time monitoring of pressure, temperature, and humidity in casts. Sensors (Basel). 2019;19(10):2417.
Comments (0)